Comments for Leaf Development Blog http://blogs.leaflabs.com Fri, 26 Feb 2010 20:30:46 -0500 http://wordpress.org/?v=2.8.5 hourly 1 Comment on by joshua wojnas http://blogs.leaflabs.com/2010/02/221/comment-page-1/#comment-1570 joshua wojnas Fri, 26 Feb 2010 20:30:46 +0000 http://blogs.leaflabs.com/?p=221#comment-1570 I still wonder if it will be able to print out the usb port like a high speed or full speed virtual com port at usb speeds. I still wonder if it will be able to print out the usb port like a high speed or full speed virtual com port at usb speeds.

]]> Comment on by signal7 http://blogs.leaflabs.com/2010/02/221/comment-page-1/#comment-1563 signal7 Wed, 24 Feb 2010 22:06:47 +0000 http://blogs.leaflabs.com/?p=221#comment-1563 Gosh, I wish I could get my hands on one just so I could experiment with some decoupling techniques. Your noise is my gold! Gosh, I wish I could get my hands on one just so I could experiment with some decoupling techniques. Your noise is my gold!

]]> Comment on the state of the maple tree by joshua wojnas http://blogs.leaflabs.com/2010/02/the-state-of-the-maple-tree/comment-page-1/#comment-1551 joshua wojnas Tue, 23 Feb 2010 16:37:55 +0000 http://blogs.leaflabs.com/?p=229#comment-1551 The high speed virtual serial port or virtual com port option linking the print commands arduino code to the usb and linux would be great do they work??? The high speed virtual serial port or virtual com port option linking the print commands arduino code to the usb and linux would be great do they work???

]]> Comment on the state of the maple tree by jodhua wojnas http://blogs.leaflabs.com/2010/02/the-state-of-the-maple-tree/comment-page-1/#comment-1550 jodhua wojnas Tue, 23 Feb 2010 12:21:17 +0000 http://blogs.leaflabs.com/?p=229#comment-1550 Great Kicad is what I use free route I like for simple boards & it makes it truly open source. I know it is different from eagle but EMSL and other tutorials for it are great. The mailing list is very VERY smart. Here is a link to my kicad stuff... http://sites.google.com/site/openloopproject/ I am looking forward to the release does this output the true usb high speed virtual com port from the arm hardware? I want to shovel lots of data from my ads1278. I have not found a way to do it yet easly. The teensy sorta works but it may get bogged down trying to pull in all the samples & output them the usb. Great Kicad is what I use free route I like for simple boards & it makes it truly open source. I know it is different from eagle but EMSL and other tutorials for it are great. The mailing list is very VERY smart.
Here is a link to my kicad stuff…
http://sites.google.com/site/openloopproject/
I am looking forward to the release does this output the true usb high speed virtual com port from the arm hardware? I want to shovel lots of data from my ads1278.
I have not found a way to do it yet easly. The teensy sorta works but it may get bogged down trying to pull in all the samples & output them the usb.

]]> Comment on the state of the maple tree by poslathian http://blogs.leaflabs.com/2010/02/the-state-of-the-maple-tree/comment-page-1/#comment-1547 poslathian Tue, 23 Feb 2010 04:16:27 +0000 http://blogs.leaflabs.com/?p=229#comment-1547 were trialling kikcad now! In fact, the maple native layout is being done in kicad were trialling kikcad now! In fact, the maple native layout is being done in kicad

]]> Comment on the state of the maple tree by joshua wojnas http://blogs.leaflabs.com/2010/02/the-state-of-the-maple-tree/comment-page-1/#comment-1497 joshua wojnas Thu, 18 Feb 2010 14:34:51 +0000 http://blogs.leaflabs.com/?p=229#comment-1497 I know on my google project that uses a lot of references and regulators The data sheets for them mention a low ESR caps on inputs and outputs and trim aireas that can use a capacitor or low esr cap. If you go to 4 layor boards or larger boards please go truly open source use kicad I use it it works great for my open source project eagle has limitations & is not open source like kicad. Also kicads scripting options for all of its files lead to some interesting posibillities. I know on my google project that uses a lot of references and regulators The data sheets for them mention a low ESR caps on inputs and outputs and trim aireas that can use a capacitor or low esr cap.

If you go to 4 layor boards or larger boards please go truly open source use kicad I use it it works great for my open source project eagle has limitations & is not open source like kicad.

Also kicads scripting options for all of its files lead to some interesting posibillities.

]]> Comment on the state of the maple tree by cozo http://blogs.leaflabs.com/2010/02/the-state-of-the-maple-tree/comment-page-1/#comment-1477 cozo Tue, 16 Feb 2010 20:17:21 +0000 http://blogs.leaflabs.com/?p=229#comment-1477 when will the maple native come alive? when will the maple native come alive?

]]> Comment on by jessb http://blogs.leaflabs.com/2010/02/221/comment-page-1/#comment-1381 jessb Fri, 12 Feb 2010 01:01:49 +0000 http://blogs.leaflabs.com/?p=221#comment-1381 sweeeeeeeeeeeet sweeeeeeeeeeeet

]]> Comment on by Pete http://blogs.leaflabs.com/2010/02/221/comment-page-1/#comment-1374 Pete Thu, 11 Feb 2010 18:53:48 +0000 http://blogs.leaflabs.com/?p=221#comment-1374 I am eagerly anticipating v2! I am eagerly anticipating v2!

]]> Comment on Maple on Mac OS X! by tefman3d http://blogs.leaflabs.com/2010/01/maple-on-mac-os-x/comment-page-1/#comment-1034 tefman3d Wed, 27 Jan 2010 03:37:06 +0000 http://blogs.leaflabs.com/?p=209#comment-1034 "A pre-built app should be available on the website shortly." Soon? Pretty Please? W/ sugar? .....Maple Sugar? Thanz in Advanze.. -tefman “A pre-built app should be available on the website shortly.”

Soon? Pretty Please? W/ sugar? …..Maple Sugar?

Thanz in Advanze.. -tefman

]]>